Quick Cart
Number of items: 0
Items Total: £0.00
Categories
Search

  Home > Triumph Herald, Spitfire, GT6, Vitesse

4 x TRIUMPH HERALD, SPITFIRE, VITESSE, GT6 EXTENDED WHEEL STUDS 158729X

4 x TRIUMPH HERALD, SPITFIRE, VITESSE, GT6 EXTENDED WHEEL STUDS 158729X

 Our Price: £15.58


Price is for one set of 4 extended wheel studs to fit the Triumph Herald, Spitfire, Vitesse or GT6.

If you buy 4 sets, they will be sent in two packets because of their value.

Equivalent to OE part number 158729X, 3/8".

Note! These are longer than standard, so therefore suitable for alloy wheel fitment.

Overall length to shoulder approx 43mm, length of thread approx 29mm.

Recommended maximum torque 55 lbs.

Note! The TSSC has recommended that these should be checked for any initial stretch or slackening off after their first few runs.


The knurling on the studs can be coarse or fine, but it has no bearing on ease of fitment.

The hole in the hub where the stud fits is plain, and the knurling deforms as it is squeezed into the hole gripping securely as it does.

Ideally the studs should be pressed into the hub from behind using a flypress, or hydraulic press.

Pulling the stud through from the front using a wheel nut can put undue strain on the stud, and nut.

(120gr)









« Back