Quick Cart
Number of items: 0
Items Total: £0.00
Categories
Search

  Home > Triumph TR2, TR3, TR3A, TR4, TR4A, TR250, TR5, TR6, TR7, Stag, 2000, 2.5

TRIUMPH TR4A - TR6, STAG / SCIMITAR ANTI ROLL BAR LINKS

TRIUMPH TR4A - TR6, STAG / SCIMITAR ANTI ROLL BAR LINKS

 Our Price: £15.30

One pair of brand new high quality LH and RH front anti roll bar links for the Triumph TR4A, TR5, TR250, TR6 and Stag, plus Reliant Scimitar Se5a (up to 1976). Equivalent to OE reference 152143A.

Note regarding the Scimitar fitment -  the spanner fitting is slightly longer than the original, so the mountings will rest about 1/4 inch further out, but if the ARB rod is properly centralised on the car it has absolutely no effect on how it works.
Also the bottom mounting for the Link has slots in it to allow for the slight differences in ARB rod lengths and chassis widths, so you can fit the links then loosen the ARB mountings both on the chassis and the lower links on the suspension, and this will centralise the whole set up.
A friend of mine who is a Scimitar specialist has fitted these links to a few cars including the Coupe without a problem.
The slightly longer hex section makes it easier to fit than the original Reliant fitting as you can actually get a proper spanner onto the mounting to stop it twisting inside the rubber jointing when fitting it, unlike the Reliant mounting that needed a thinner spanner to fit between the bracket and the joint.
Also it leaves a little more room to get at the nut on the link bracket with a ring spanner or socket. 

Not suitable for the Scimitar Se6 on - this has a different roll bar and you cannot physically fasten these to it as the mounting holes are at right angles to the position of movement.

(550gr)

Pay instantly with your debit or credit card through PayPal.
Pay me securely with any major credit card through PayPal.
VisaMasterCardAmerican ExpressSoloSwitch








« Back